PV-Anlage --- Freckenfeld --- 11,100 kWp --- Stand 01.07.25-13:10:03 | ||
---|---|---|
aktueller Tag mit Einzelwerten (AC,DC) aller Wechselrichter | ||
PV-Monitoring --- (c) pvmoni --- V1.74 2024-06-20 days_htm.php | ||
Erstellt am 01.07.25-13:16 | - Files='days.js + base_vars.js + min_cur.js' - |
#51 --- PV-Freckenfeld --- '25-07-01/13:10:03' --- Übersicht Datenlogger SolarLog | |||||
PV-Anlage | Datum | SolarLog | SerienNr | Firmware | Wirkungsgrad AC / DC |
Freckenfeld | 25-07-01/13:10:03 | 500 | 540227580 | 2.8.4 Build 56 - 27.01.2014 | 93 ... 96 ... 98 % |
Vergütung Cent/kWh | Sum-AC [Watt] | Sum-DC [Watt] | DC-A [Watt] | DC-B [Watt] | DC-C [Watt] |
39.14 | 7.587 | 7.708 | 5.233 | 2.475 | - |
PV-Freckenfeld --- '25-07-01/13:10:03' --- aktuelle Wechselrichter-Werte ---Datum---'25_07_01/13:16:26'--- | ||||||||||||||
#1 | #2 | #3 | #4 | #5 | #6 | #7 | #8 | #9 | #10 | #11 | #12 | #13 | #14 | |
WR | DC-A | DC-B | DC-Summe | AC | Wirkungsgrad | AC-Ertrag | WR | DC-A | DC-B | Ertrag | Riso | Status | Fehler | |
Nr | Watt (Wh/Wp) | Watt (Wh/Wp) | Watt (Wh/Wp) | Watt (Wh/Wp) | AC / DC | Wh | Wp | Wp | Wp | kWh/kWp | kOhm | #8 | #60 | |
WR-01 | 2.603 ( 0,70 ) | 1.239 ( 0,67 ) -4 % | 3.842 ( 0,69 ) | 3.784 ( 0,68 ) | 98.49 % | 15.521 | 5.550 | 3.700 | 1.850 | 2,80 | - | 4=MPP | - | |
WR-02 | 2.630 ( 0,71 ) | 1.236 ( 0,67 ) -6 % | 3.866 ( 0,70 ) | 3.803 ( 0,69 ) | 98.37 % | 15.610 | 5.550 | 3.700 | 1.850 | 2,81 | - | 4=MPP | - | |
SUMME | 5.233 ( 0,71 ) | 2.475 ( 0,67 ) | 7.708 ( 0,69 ) | 7.587 ( 0,68 ) | 98.43 % | 31.131 | 11.100 | 7.400 | 3.700 | 2,80 | Riso | - | - |
PV-Freckenfeld --- '25-07-01/13:10:03' --- WR_Beschreibung / SN | ||||||
#1 | #2 | #3 | #4 | #5 | #6 | #7 |
WR | WR | SerienNr=SN | WR | Eingang-A | Eingang-B | Summe |
Nr | Typ | Nummer | Name | Wp | Wp | Wp |
WR-01 | WR4_5TL-20 | 2100159998 | WR-1 | String-1-1=3.700 | String-1-2=1.850 | 5.550 Wp |
WR-02 | WR4_5TL-20 | 2100160988 | WR-2 | String-2-1=3.700 | String-2-2=1.850 | 5.550 Wp |
SUMME | ||||||
Sum-Wp | 7.400 Wp | 3.700 Wp | 11.100 Wp |
--- Tabelle für 'SMA'-Wechselrichter |
SolarLog-Status-Tabelle ( #8 Werte) |
0='Undetermined' |
1='NoConnection' |
2='Online' |
3='Msg' |
4='MPP' |
5='Fault' |
6='Warning' |
7='Off' |
8='Unknown' |
--- Tabelle für 'SMA'-Wechselrichter |
SolarLog-Fehler-Tabelle ( #60 Werte) |
1='Frequency not permitted' |
2='Derating occurred' |
3='Unstable operation' |
4='Data storage not possible' |
5='Insulation resistance' |
6='Grid failure' |
7='-------' |
8='Communication disturbed' |
9='DC overcurrent' |
10='Overload' |
11='Overtemperature' |
12='Varistor defective' |
13='Start conditions not met' |
14='PE connection missing' |
15='L / N swapped' |
16='DC overvoltage' |
17='Interference of device' |
18='Check fuse' |
19='Check generator' |
20='Disconnect generator' |
21='Check parameter' |
22='Check connection' |
23='High discharge current' |
24='SD card defective' |
25='Parameter file error' |
26='Set parameter' |
27='Parameter setting failed' |
28='Parameters set successfully' |
29='No new update on the SD card' |
30='Update file defective' |
31='Update file OK' |
32='No update file found' |
33='Self diagnosis' |
34='self-test' |
35='Abort self-test' |
36='Input A defective' |
37='Input B defective' |
38='Grid parameter unchanged' |
39='Grid parameter locked' |
40='Installer code invalid' |
41='Sens. fault fan permanently on' |
42='Installer code valid' |
43='Update Bluetooth' |
44='Update Bluetooth failed' |
45='SD card is read' |
46='Update completed' |
47='Update main CPU' |
48='Update main CPU failed' |
49='Update RS485I module' |
50='Update RS485I module failed' |
51='Update communication' |
52='Update language table' |
53='Update language table failed' |
54='Update display' |
55='Update display failed' |
56='Wait for DC start conditions' |
57='Waiting for grid voltage' |
58='Residual current too high' |
59='Installation fault' |
60='Change grid param. impossible' |